From: bellis@xxxxxxxxxxxxxx
Date: Thu Oct 18 2001 - 11:48:51 GMT-3
Hey gang! I sent an email yesterday saying I could give out the trick to
installing CM 3.1 on any computer. I have been informed that it is a Cisco
proprietary secret and not for general knowledge. Sorry, my bad!!!!!
-Brad
----- Original Message -----
From: "Barry Bocaner" <BBocaner@planetgov.com>
To: "'Mike Hennigan'" <Mikeh@wnycs.com>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, October 17, 2001 3:38 PM
Subject: RE: Call manager 3.1 (OT)
> That's not true. Since version 3.0 The install disks are model specific
and
> a set for the MCS-7835 won't install on a DL380 for example which is an
> identical server.
>
> The software will pretty much run on anything, I've seen Cisco employees
> running Call Manager AND Unity on a notebook for demo purposes, but the
> installs for these unhindered versions aren't available to us mere
mortals.
>
> --
> Barry J. Bocaner, CCIE No. 6852
> <bbocaner@planetgov.com>
> Senior Network Engineer
> PlanetGov, Inc. (703) 279-5438
>
> > -----Original Message-----
> > From: Mike Hennigan [mailto:Mikeh@wnycs.com]
> > Sent: Wednesday, October 17, 2001 3:25 PM
> > To: dre_mema@hotmail.com; lkouncar@UU.NET; alennon_uk@yahoo.com
> > Cc: ccielab@groupstudy.com
> > Subject: RE: Call manager 3.1 (OT)
> >
> >
> > The call manager software will run on any compaq server which
> > meets the
> > hardware requirements for call manager. The server doesn't
> > have to be a "cisco
> > server"
> >
> > Michael Hennigan, CCIE# 7993
> > Sr. Systems Engineer
> > Infrastructure Specialist
> > Western New York Computing Systems
> > Phone: 716-250-3700
> > Cell: 716-553-1124
> >
> >
> > >>> "Andrew Lennon" <alennon_uk@yahoo.com> 10/17/01 02:11PM >>>
> > Louie
> >
> > During the install, the routine checks the BIOS for certain OEM
> > signatures which define the box as a Cisco/Compaq unit. I
> > was told this
> > by our old Cisco SE about a year ago when I enquired about it during a
> > workshop on Call Mangler 3. In other words you are SOOL.
> >
> > Regs,
> >
> > Andy
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> > Behalf Of
> > Mema Dre
> > Sent: 16 October 2001 23:58
> > To: lkouncar@UU.NET
> > Cc: ccielab@groupstudy.com
> > Subject: Re: Call manager 3.1 (OT)
> >
> > If you can get a part of registry that saying Platform ID from the
> > Compaq
> > server with Call Manager installed and put it on any Intel PC..this
> > should
> > work...
> >
> >
> >
> > >From: "louie Kouncar" <lkouncar@UU.NET>
> > >Reply-To: "louie Kouncar" <lkouncar@UU.NET>
> > >To: <ccielab@groupstudy.com>
> > >Subject: Call manager 3.1 (OT)
> > >Date: Tue, 16 Oct 2001 18:27:54 -0400
> > >
> > >All,
> > >
> > >I understand that call manager requires special hardware to
> > work, does
> > >anyone know if there is a way to get it to work on other
> > hardware that
> > >is not supported?
> > >
> > >Thank you
> > >
> > >Louie
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:21 GMT-3