From: Richard Geiger (geiger_rich@xxxxxxxxxxx)
Date: Tue Oct 16 2001 - 14:38:27 GMT-3
TTY 0 = console
TTY 1 = aux (unless you have the cpability of async lines in hardware)
Does he mean set the VTY to 1, so only one telnet session can be
established.....?
If so specify line vty 0 with login and password, and do a no login on line
vty 1-4
To figure out what you have, just do a -show line
>From: "Wright, Jeremy" <JA_WRIGHT@admworld.com>
>Reply-To: "Wright, Jeremy" <JA_WRIGHT@admworld.com>
>To: "'David Siwula'" <DSiwula@ceira.com>, "Wright, Jeremy"
><JA_WRIGHT@admworld.com>
>CC: "'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
>Subject: RE: quick config question
>Date: Tue, 16 Oct 2001 09:54:24 -0500
>
>The instructions from my boss is to "verify that the TTY connection is set
>to 1" Thanks.
>
> -----Original Message-----
> From: David Siwula [mailto:DSiwula@ceira.com]
> Sent: Tuesday, October 16, 2001 9:52 AM
> To: Wright, Jeremy
> Subject: RE: quick config question
>
> 1 what?
>
> -----Original Message-----
> From: Wright, Jeremy [mailto:JA_WRIGHT@admworld.com]
> Sent: Tuesday, October 16, 2001 7:44 AM
> To: 'ccielab@groupstudy.com'
> Subject: quick config question
>
>
> I'm trying to set my tty connection to 1...looked through
>CCO and not
> having
> much luck narrowing my search down...thanks for any input
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:20 GMT-3