From: mitch erickson (roketship@xxxxxxxxxxx)
Date: Thu Oct 11 2001 - 20:31:59 GMT-3
Just in case you didn't read Bryans email:
int fa 0/0
ip add 10.10.10.1 /26
Problem:
Router ospf 1
network 10.0.0.0 0.0.0.0.255 area 1 >>>>try 10.10.10.1 0.0.0.0<<<<<<
network 192.168.0.0 0.0.255.255 area 0
Unless i missed the boat completely!
---Mitch
>From: "John Elias" <jelias_@hotmail.com>
>Reply-To: "John Elias" <jelias_@hotmail.com>
>To: bosoro@hotmail.com, euchime@yahoo.com
>CC: ccielab@groupstudy.com
>Subject: Re: OSPF interface
>Date: Thu, 11 Oct 2001 19:03:16 -0400
>
>Elias,
> Is it possible for you to post some of the configs?
>
>
>John E.
>CCIE #8150
>
>
>>From: "Bryan Osoro" <bosoro@hotmail.com>
>>Reply-To: "Bryan Osoro" <bosoro@hotmail.com>
>>To: euchime@yahoo.com
>>CC: ccielab@groupstudy.com
>>Subject: Re: OSPF interface
>>Date: Thu, 11 Oct 2001 15:41:21 -0600
>>
>>I bet if you did a "show ip ospf interface" command it would not show
>>FastE0/0 in the OSPF process. Change your network statement to either
>>
>>network 10.10.10.1 0.0.0.0 area 1, network 10.10.10.1 0.0.0.63 area 1, or
>>network 10.0.0.0 0.255.255.255 area 1
>>
>>
>>
>>That should fix you right up
>>
>>
>>
>>
>>-Bryan
>>
>>>From: Elias Udechime <euchime@yahoo.com>
>>>Reply-To: Elias Udechime <euchime@yahoo.com>
>>>To: euchime@yahoo.com
>>>CC: ccielab@groupstudy.com
>>>Subject: OSPF interface
>>>Date: Thu, 11 Oct 2001 13:57:06 -0700 (PDT)
>>>
>>>I have a laptop and 3640 connected to a hub. The PVC
>>>on the 3640 is the only way to get out to the next
>>>hop.
>>>
>>>(diagram)
>>>[laptop]----10/100---|HUB|--FE0/0----[3640]---pvc.....
>>>
>>>For some reason, the laptop can't ping past the 3640.
>>>I suspect it to be an OSPF problem with the FE0/0
>>>interface. F0/0 10.10.10.1/26 with Ip ospf network
>>>Non-broadcast
>>>
>>>The 3640 isn't routing between the Ethernet IP address
>>>and the PVC IP address 192.168.1.1/30...IP ospf
>>>network point to point
>>>
>>>Sample:
>>>
>>>Router ospf 1
>>>network 10.0.0.0 0.0.0.0.255 area 1
>>>network 192.168.0.0 0.0.255.255 area 0
>>>
>>>Of course from the 3640, you can ping the far end
>>>router with no problem.
>>>
>>>Routing between Ethernet interface to ATM interface
>>>
>>>Any suggestion?
>>>
>>>Elias
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:17 GMT-3