From: ohanusi anthony (ohanusi@xxxxxxxxxxxxxxxxx)
Date: Fri Oct 12 2001 - 02:29:00 GMT-3
Elias,
are you using physical ,p-t-p or mult subinterface .If it's on physical or
multipoint interface try maping that pvc to the ip address on the ATM
interface and see.
Regards
At 01:57 PM 10/11/2001 -0700, Elias Udechime wrote:
>I have a laptop and 3640 connected to a hub. The PVC
>on the 3640 is the only way to get out to the next
>hop.
>
>(diagram)
>[laptop]----10/100---|HUB|--FE0/0----[3640]---pvc.....
>
>For some reason, the laptop can't ping past the 3640.
>I suspect it to be an OSPF problem with the FE0/0
>interface. F0/0 10.10.10.1/26 with Ip ospf network
>Non-broadcast
>
>The 3640 isn't routing between the Ethernet IP address
>and the PVC IP address 192.168.1.1/30...IP ospf
>network point to point
>
>Sample:
>
>Router ospf 1
>network 10.0.0.0 0.0.0.0.255 area 1
>network 192.168.0.0 0.0.255.255 area 0
>
>Of course from the 3640, you can ping the far end
>router with no problem.
>
>Routing between Ethernet interface to ATM interface
>
>Any suggestion?
>
>Elias
>
>
>
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:17 GMT-3