Re: nat -- load banlancing / route map

From: Daniel Prinsloo (daniel@xxxxxxxxxxxxxx)
Date: Tue Oct 09 2001 - 18:47:51 GMT-3

• Next message: Charles Manafa: "Re: ip-helper question"
• Previous message: Sasa Milic: "Re: Multicast program"
• Maybe in reply to: Daniel Hong: "nat -- load banlancing / route map"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Daniel,

good evening. This was on a 2600 running 12.1.(3), HDLC encapsulation. I
used the examples that was given in BCRAN by Paquet p.449.

Daniel Hong wrote:

> Hi Dan
>
> What platform and IOS are you runing? I used your config, but I got encap fa
ilure
>
> nat#
> 01:05:31: IP: s=201.0.0.2 (Serial0), d=192.168.1.100 (Ethernet0), g=192.168.1
.10
> 0, len 100, forward
> 01:05:31: IP: s=201.0.0.2 (Serial0), d=192.168.1.100 (Ethernet0), len 100, en
cap
> sulation failed
>
>
>
> Daniel Hong
> Master In Telecommunications, CCDP & CCNP+Voice

• Next message: Charles Manafa: "Re: ip-helper question"
• Previous message: Sasa Milic: "Re: Multicast program"
• Maybe in reply to: Daniel Hong: "nat -- load banlancing / route map"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:16 GMT-3