From: Brian (signal@xxxxxxxxxx)
Date: Tue Oct 09 2001 - 17:39:06 GMT-3
I have an ethernet setup with a primary and secondary network:
int ethernet0
ip address 10.1.1.1 255.255.255.0
ip address 192.168.4.1 255.255.255.0 secondary
The Windows WINS server/PDC is on 10.1.1.1. Users on 192.168.4.1 could
not browse the 10.1.1.1 network, so I added a helper-address:
int ethernet0
ip address 10.1.1.1 255.255.255.0
ip address 192.168.4.1 255.255.255.0 secondary
ip helper-address 10.1.1.30
with the above they can browse, and they can connect to the PDC (the
10.1.1.30 IP is the PDC), but no other machines. I did try to use
10.1.1.255 for the helper address, and also 10.1.1.255 AND 10.1.1.30 at
the same time, neither of those works.......only if I have 10.1.1.30 as
the helper-address. I don't deal much with window networks, but I figure
someone on here can shed some light as to why this wouldn't be working.
Thanks
Brian
-----------------------------------------------
Brian Feeny, CCIE #8036 e: signal@shreve.net
Network Engineer p: 318.222.2638x109
ShreveNet Inc. f: 318.221.6612
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:16 GMT-3