From: Khalid Nafie (knafie@xxxxxxxxxx)
Date: Sun Oct 07 2001 - 06:48:50 GMT-3
Dear all,
Does any one know y IPSEC works when I put the crypto map into the
e2/0 (phisical interface), but doesn't work with the same configuration when
i put the crypto map into Tunn2, here is my configuration:
thx in advance;
crypto isakmp policy 1
authentication pre-share
crypto isakmp key cisco address 62.7.1.2
!
!
crypto ipsec transform-set cisco esp-des esp-md5-hmac
!
!
crypto map toR2 10 ipsec-isakmp
set peer 62.7.1.2
set transform-set cisco
match address 100
!
interface Tunnel2
ip address 23.1.1.3 255.255.255.0
no ip directed-broadcast
tunnel source 62.9.3.3
tunnel destination 62.7.1.2
!
interface Ethernet2/0
ip address 62.9.3.3 255.255.0.0
no ip directed-broadcast
crypto map toR2
!
access-list 100 permit ip host 62.9.3.3 host 62.7.1.2
================================================
Yours,
Khaled Nafie
Network Engineer
Customer Services
MCSE,CCDP,CCNP VOICE ACCESS
NCR Corporation, Kuwait
Mob.: +965-9872046
Tel : +965- 2412201, 2412203
Fax : +965-2413075
Having trouble posting? Read:
http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:14 GMT-3