From: Beck, Mark (Mark.Beck@xxxxxxxxxxxxx)
Date: Thu Oct 04 2001 - 12:04:30 GMT-3
I had the same problem. It turns out that the rommon doesn't have the
code to implement the dnld command but its listed there!
I tried a PCMCIA card from a RSM which was meant to be the same format -
it did not work.
In the end I copied the image down to the internal flash of an RSM -
then moved the flash chip to the 1010 asp. If you cant do this I would
look at an RMA.
Regards,
Mark Beck
CCIE: 6906
> -----Original Message-----
> From: Yogamurthy M B [mailto:yoga_blr@yahoo.com]
> Sent: 02 October 2001 12:22
> To: ccielab@groupstudy.com
> Subject: LS1010 Flash upgrade....failure
>
>
> Hi pals,
>
> Do any of U hv tried upgrading/erasing flash on LS1010 ASP
> (on catalyst
> 5500). ASP Rommon has only dnld command, which doesnt work
> straight like
> tftpdnld to me.... can any body through some light on this.
>
> This ASP contains 8MB flash and 32 MB DRAM and was working fine with
> ls1010-wp-mz.120-6.bin. I was unable to use ethernet 13/0/0
> as seperate
> router and PVC use to show UP but know data transaction. I
> tried upgrading
> this to ls1010-wp-mz.121-7a.EY.bin (mim 64MB RAM required as per CCO
> site). UPgrade was sucessufull but after reloading It gives a
> insufficient
> memory and reloads continuesly.
>
> I tried to revert back to old image via Rommon it does not
> work straight
> through dnld with boot environmental variables.
>
> waiting for Ur reply.......
>
> yoga.
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:13 GMT-3