From: Tom Holloway (Tom_holloway@xxxxxxxxxxxxxx)
Date: Wed Oct 03 2001 - 10:07:22 GMT-3
the VIC modules will also work in the 1750 and 1751 with appropriate memory
levels and IP plus voice ios images.
> -----Original Message-----
> From: kym blair [SMTP:kymblair@hotmail.com]
> Sent: Tuesday, October 02, 2001 9:54 AM
> To: michael.le@lendlease.com.au; ccielab@groupstudy.com
> Subject: Re: Voice cards
>
> Mike,
>
> Everything you said is correct. VIC cards are not interchangeable with
> WIC
> cards. VIC cards only work in NM-1V and NM-2V network modules. WIC-1T,
> WIC-1B-U, etc only work in WIC slots. The WIC-2FXS is for connecting
> handsets (provides dial tone, ring, etc.); it supports two telephones; the
>
> WIC-2FXO is for connecting to a PBX and does not support a handset.
>
> Kym
>
>
>
> >From: "Michael Le" <michael.le@lendlease.com.au>
> >Reply-To: "Michael Le" <michael.le@lendlease.com.au>
> >To: ccielab@groupstudy.com
> >Subject: Voice cards
> >Date: Tue, 2 Oct 2001 17:11:19 +1000
> >
> >Hi Group
> >I've got a VIC 2FXS card and it only seems to work if the router has a
> >voice module.
> >IE i can't just place it in a WIC slot, doesn't seem to detect on boot
> (I'm
> >using a "plus" feature set)
> >
> >I also have a FXO card, I understand these are meant to be connected into
> >PABX's - is it possible to connect handsets directly to them?
> >
> >
> >Will either of these work on 2600/3600/1700 routers without any
> additional
> >modules?
> >
> >
> >Thanks,
> >Mike
> >**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:12 GMT-3