From: Jason Sinclair (sinclairj@xxxxxxxxxxxxxxx)
Date: Wed Oct 03 2001 - 00:25:32 GMT-3
Charles,
Use the no-exec command under the lines you are rev telnetting from.
Regards,
Jason Sinclair
Team Leader - NSG
POWERTEL Limited
Level 11, 55 Clarence Street, SYDNEY
Phone: 61-2-8264-3820
Mobile: 0416 105 858
jasons@powertel.net.au
-----Original Message-----
From: Charles Huang [mailto:CharlesNY2000@Yahoo.Com]
Sent: Wednesday, 3 October 2001 13:06
To: ccielab@groupstudy.com
Subject: Terminal Server receiving garbage from Async
lines at boot up
Hi,
I have a cisco 2511 terminal server which connects to couple
router's
consoles. Everytime I power up the rack, I need to clear
each line couple
times before I can reverse telnet to router's console port.
Is there a
command I can use to avoid clear each line everytime I need
to reverse telnet
?
any help would be appreicated
Thanks
Charles
**Please read:http://www.groupstudy.com/list/posting.html
**********************************************************************
This email (including all attachments) is intended solely for the named
addressee. It is confidential and may contain commercially sensitive
information. If you receive it in error, please let us know by reply email,
delete it from your system and destroy any copies.
This email is also subject to copyright. No part of it should be reproduced,
adapted or transmitted without the prior written consent of the copyright owner
.
Emails may be interfered with, may contain computer viruses or other defects
and may not be successfully replicated on other systems. We give no
warranties in relation to these matters. If you have any doubts about
the authenticity of an email purportedly sent by us, please contact us
immediately.
**********************************************************************
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:12 GMT-3