RE: Routes in table

From: Olivier Martin (omartin@xxxxxxxx)
Date: Mon Sep 17 2001 - 13:41:17 GMT-3

• Next message: Church, Chuck: "RE: Frame-Relay Threshold"
• Previous message: Jim Brown: "RE: Frame-Relay Threshold"
• Maybe in reply to: Donald B Johnson jr: "Routes in table"
• Next in thread: Jason Gardiner: "Re: Routes in table"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi,

The route is put in the table if there is no better or equal route.. A
route is equal if it has the same prefix. The administrative distance
determines which route to install (whici protocol is prefered, which you can
change with the distance command in router config mode).

Prefix lenght
Administrative distance
Metric

Olivier

-----Message d'origine-----
De : Donald B Johnson jr [mailto:dbjohnson@adelphia.net]
Envoyi : 17 septembre, 2001 15:39
@ : ccielab@groupstudy.com
Objet : Routes in table

Could some one definitively tell me how would routes be placed in table.
1 prefix length, admin dis, metric
2 admin dis, prefix length, metric
Thanks
Don
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: Church, Chuck: "RE: Frame-Relay Threshold"
• Previous message: Jim Brown: "RE: Frame-Relay Threshold"
• Maybe in reply to: Donald B Johnson jr: "Routes in table"
• Next in thread: Jason Gardiner: "Re: Routes in table"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:19 GMT-3