From: Jason Sinclair (sinclairj@xxxxxxxxxxxxxxx)
Date: Mon Sep 17 2001 - 03:32:10 GMT-3
Actually I understand that the dialer interface number must match the rotary
group and the dialer-group number applies the access list for interesting
traffic, but could someone please explain which you should use when?
Thanks,
Jason Sinclair
Team Leader - NSG
POWERTEL Limited
Level 11, 55 Clarence Street, SYDNEY
Phone: 61-2-8264-3820
Mobile: 0416 105 858
jasons@powertel.net.au
-----Original Message-----
From: Jason Sinclair
Sent: Monday, 17 September 2001 16:23
To: 'ccielab@groupstudy.com'
Subject: ISDN dialer rotary-group versus dialer
pool-member
Hi,
Can someone highlight the difference between rotary groups
and pool members as they both seem to bind physical interfaces to logical
config:
Eg the following seem to be the same
Int bri 0
Dialer rotary-group 1
Int dialer 1
Dialer-group 1
OR
Int bri0
Dialer pool-member 1
Int dialer 1
Dialer pool 1
Regards,
Jason Sinclair
Team Leader - NSG
POWERTEL Limited
Level 11, 55 Clarence Street, SYDNEY
Phone: 61-2-8264-3820
Mobile: 0416 105 858
jasons@powertel.net.au
**********************************************************************
This email (including all attachments) is intended solely for the named
addressee. It is confidential and may contain commercially sensitive
information. If you receive it in error, please let us know by reply email,
delete it from your system and destroy any copies.
This email is also subject to copyright. No part of it should be reproduced,
adapted or transmitted without the prior written consent of the copyright owner
.
Emails may be interfered with, may contain computer viruses or other defects
and may not be successfully replicated on other systems. We give no
warranties in relation to these matters. If you have any doubts about
the authenticity of an email purportedly sent by us, please contact us
immediately.
**********************************************************************
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:19 GMT-3