From: Hardesty, Scott X. (AIT) (sh1278@xxxxxxx)
Date: Sun Sep 16 2001 - 16:03:32 GMT-3
You may want to try the Summary-address command. You would still need to
get the 10.1.1.0 network into your routing table. The router would
essentially become an ASBR. This will make the 10.1.1.0 network appear as
an external network E2 or E1. This would be a way to advertise the 10.1.1.0
network into your OSPF process without placing it into OSPF....
just a thought.
-----Original Message-----
From: Cade Wagner [mailto:cwagner@logosinc.com]
Sent: Sunday, September 16, 2001 2:51 PM
To: 'ohanusi anthony'; 'ccielab@groupstudy.com'
Cc: 'dward@pla.net.au'
Subject: RE: OSPF Area Summary Question
The problem is indeed that I don't have a subset of area 1 in the
range of 10.1.1.0/24. Maybe I am approaching the problem incorrectly. How
then do I advertise a range that isn't included in an OSPF area to OSPF
Routers without redistribution, without statics, and without adding the
outside range to an OSPF area? Thinking about it I guess that I could add a
loopback to this range and then use the area range command. Any thoughts?
Thanks.
Cade Wagner
-----Original Message-----
From: ohanusi anthony [mailto:ohanusi@lagos.sns.slb.com]
Sent: Sunday, September 16, 2001 10:46 PM
To: Cade Wagner; 'ccielab@groupstudy.com'
Subject: Re: OSPF Area Summary Question
make sure you are executing this commmand on an abr .
At 01:44 PM 9/16/2001 -0400, Cade Wagner wrote:
> Not sure what I am doing wrong, but I can never get the area 1
range
>10.1.1.0 255.255.255.0 command to work.
>
> Many of the examples that I have seen have a route to Null0 for
what
>is summarized. Is this necessary like in BGP for advertised networks?
Will
>a route from another protocol like EIGRP work in its place? I have tried
it
>all three ways with no success. Probably just overlooking something
simple.
>Thanks for the help in advance.
>
> Cade Wagner
>**Please read:http://www.groupstudy.com/list/posting.html
Ohanusi Anthony CCNA,CCNP,CCIE Written.
WAN Engineer
Network Solution, A Schlumberger Company
Email : <ohanusi@lagos.sns.slb.com>
Phone : 234-1-2610446 EXT 3230
Fax : 234-1-2621034
Learn to qualify your statement
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:19 GMT-3