From: Hansang Bae (hbae@xxxxxxxxxx)
Date: Sat Sep 15 2001 - 15:16:15 GMT-3
At 02:06 PM 9/15/01 +0000, ccie spoon wrote:
>hello everyone,
>
>this is just a quick note asking for a summary (!) to a problem that
>research into the archives has only served to confuse my more about...
>redistribution of ospf into igrp. As I understand summary address will NOT
>work on the ASBR as the command is intended for routes going into ospf.
>Area range is a better solution but, of course the router has to be an
>ASBR. Default network and (deep breath) statics are your other choices.
>The problem is that I get inconsistent results in my lab (even after
>applying route maps to prevent feedback etc.)
>Routes show up in IGRP..then go into holddown.
>If anyone could offer some kind of assistance / concise explanation or a
>pointer to one, it would be much appreciated.
Let me guess. FR interface is involved? If you do a "debug ip igrp ....."
you'll see that the routes learned from the other router gets shot right
back out. Why? because split horizon is turned off on a FR major
interface by default. So enable split horizon.
hsb
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:18 GMT-3