From: weibing gu (guwb@xxxxxxxxxxxxxxxxxxxx)
Date: Fri Sep 14 2001 - 04:09:50 GMT-3
Hi,ELAW
I switch off the MLS entirely by enter 'no mls rp ip' in globle configuration,
but it still not work. Should i power off the router?
Thanks.
At 2001-09-13 14:27:00 you write#:
>As I recall it you should always set the VTP domain first.
>It's no documented, but it's just the way you have to do it.
>
>You need to switch off MLS entirely on the router and redo the config.
>
>--Erik
>
>
>> -----Original Message-----
>> From: weibing gu [mailto:guwb@gd.bank-of-china.com]
>> Sent: Thursday, September 13, 2001 8:50 AM
>> To: CCIE LAB
>> Subject: How to change the mls rp vtp-domain
>>
>>
>> Help!
>> Today i do a mls test, but i enter 'mls rp vlan-id 1' before
>> enter 'mls rp vtp-domain', so the router is in the null
>> domain. According to the document, i do every thing but
>> cannot change it, somebody please help me,thanks.
>> The following is the output.
>>
>> ISDN_Dial(config)#int e 3/0
>> ISDN_Dial(config-if)#no mls rp ip
>> ISDN_Dial(config-if)#no mls rp management-interface
>> ISDN_Dial(config-if)#no mls rp vtp-domain ?
>> WORD vlan domain name
>>
>> ISDN_Dial(config-if)#no mls rp vtp-domain
>> % Incomplete command.
>>
>> ISDN_Dial(config-if)#no mls rp vtp-domain -null-
>> interface Ethernet3/0 is currently in -null- domain
>> ISDN_Dial(config-if)#mls rp vtp-domain test
>> interface Ethernet3/0 currently in -null- domain
>>
>>
>> Guwb
>> guwb@gd.bank-of-china.com
>> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:17 GMT-3