From: routerjocky (elouie@xxxxxxxxx)
Date: Fri Sep 14 2001 - 02:43:45 GMT-3
I just had a 2523 that did the same thing. I ended up buying a SmartNet
contract and opening a TAC case. Cisco ended up just replacing the router,
saying that I had a ROMMON problem.
----- Original Message -----
From: "Joseph R. Castro" <josephrcastro@home.com>
To: "Groupstudy (E-mail)" <ccielab@groupstudy.com>
Sent: Thursday, September 13, 2001 9:54 PM
Subject: 2522 will not boot
> Help,
>
> I just got a Cisco 2522 and it will not boot. I captured the boot
sequence,
> can anyone help me to figure out what this means/ Thanks....
>
> 00:00:07: %LINK-3-UPDOWN: Interface BRI0, changed state to up
> 00:00:08: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
> 00:00:08: %LINK-3-UPDOWN: Interface Serial0, changed state to down
> 00:00:08: %LINK-3-UPDOWN: Interface Serial1, changed state to downLocal
> Timeout
> (control reg=0x118) Error, address: 0x2134004 at 0x30BE974 (PC)
>
> System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
> Copyright (c) 1986-1995 by cisco Systems
> 2500 processor with 14336 Kbytes of main memory
>
> F3: 15190636+262200+1062240 at 0x3000060
>
> Regards,
> Joe
> **Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:17 GMT-3