From: andrew.2.shore@xxxxxx
Date: Wed Sep 12 2001 - 04:31:45 GMT-3
Try show enviroment
Andrew Shore. CCNP+Security, MCSE, CCP, BSc
Network Consultant
Internetworking Solutions Limited
-----Original Message-----
From: Reeves, Steven [mailto:sreeves@ilexonc.com]
Sent: 11 September 2001 19:24
To: Jay Hennigan; Matheus, Joshua
Cc: ccielab
Subject: RE: Temperature of equipment after WTC explosion
Cat 5000 use "show system" to get a status readout on the hardware. I
do not know a way to get a temp reading.
-----Original Message-----
From: Jay Hennigan [mailto:jay@west.net]
Sent: Tuesday, September 11, 2001 1:17 PM
To: Matheus, Joshua
Cc: 'ccielab@groupstudy.com'
Subject: Re: Temperature of equipment after WTC explosion
On Tue, 11 Sep 2001, Matheus, Joshua wrote:
> Please let me know how to check the temperature of various equipment.
It is
> in a building that has possibly lost AC across from the World Trade
> buildings.
> CAT OS and IOS
>
> Thank you in advance,
7200 routers and above:
sho env all
There are MIBs for temperature but the lower end equipment doesn't have
a direct readout, just normal or overtemp.
-- Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net NetLojix Communications, Inc. - http://www.netlojix.com/ WestNet: Connecting you to the planet. 805 884-6323 **Please read:http://www.groupstudy.com/list/posting.html **Please read:http://www.groupstudy.com/list/posting.html **Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:16 GMT-3