From: Jason Sinclair (sinclairj@xxxxxxxxxxxxxxx)
Date: Mon Sep 10 2001 - 22:53:45 GMT-3
CAR would be the way to go.
Regards,
Jason Sinclair
Team Leader - NSG
POWERTEL Limited
Level 11, 55 Clarence Street, SYDNEY
Phone: 61-2-8264-3820
Mobile: 0416 105 858
jasons@powertel.net.au
-----Original Message-----
From: Clarke.J [mailto:clark.j@163.com]
Sent: Tuesday, 11 September 2001 11:35
To: CCIE-Groupstudy
Subject: How to limit the speed of GE port on
catalyst 6509 ?
Dear CCIEs and Near CCIEs ,
We have a 6509 with MSFC2 & PFC2 , and we want to limit the
speed of GE to 10M , How can we do ?
I think rate-limit , traffic-shap or QOS maybe can help me
to resolve this problem , which is the best method ?
Can you give me a example ?
Best regards .
Clarke J
**Please read:http://www.groupstudy.com/list/posting.html
**********************************************************************
This email (including all attachments) is intended solely for the named
addressee. It is confidential and may contain commercially sensitive
information. If you receive it in error, please let us know by reply email,
delete it from your system and destroy any copies.
This email is also subject to copyright. No part of it should be reproduced,
adapted or transmitted without the prior written consent of the copyright owner
.
Emails may be interfered with, may contain computer viruses or other defects
and may not be successfully replicated on other systems. We give no
warranties in relation to these matters. If you have any doubts about
the authenticity of an email purportedly sent by us, please contact us
immediately.
**********************************************************************
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:16 GMT-3