From: Mikael9495@xxxxxxx
Date: Mon Sep 10 2001 - 14:44:04 GMT-3
Hello everyone, I have tried to configure dlsw per diagram:
DLSW works fine if configured on the physical port of fastethernet 0/0 and put
in vlan 70 of catalyst. The problem is when the bridge-group is put on a subint
erface of the trunking port the catalyst shuts down the trunk. What am I missin
g that needs to be done with dlsw and trunks, or is this not supported.
Thanks, Mike
r1 eth0_____cat5000________r2fastethernet 0/0
r1
normal dlsw configs for ether-to-ether
r2
normal dlsw configs for ether-to-ether plus
bridge irb
bri 13 bri ip
bri 13 route ip
interface fastethernet 0/0.70
bridge-group 13
encapsulation isl 70
interface bvi 13
ip add 140.10.30.6
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:16 GMT-3