From: Jason Gardiner (gardiner@xxxxxxxxxx)
Date: Sun Sep 09 2001 - 19:50:18 GMT-3
In fatkid 461, there is a question that requires an access-list to allow
telnet traffic to use 16 to 32 K. Their soluton uses an extended
access-list:
access-list 101 permit tcp any any eq telnet
Will this work? I thought that this would only allow for th intial
outbound packet to be shaped. My access-list was
access-list 101 permit tcp any eq telnet any
Since the source port will always be 23 while the remote port will change
to > 1023 once the intial session is established.
Is there a problem with my logic?
Thanks,
Jason Gardiner
Supervisor, Engineering Services
Sprint E|Solutions
"You can swim all day in the Sea of Knowledge and
still come out completely dry. Most people do."
- Norton Juster
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:16 GMT-3