From: rob.chee@xxxxxxxxxxxxxxxx
Date: Fri Sep 07 2001 - 15:13:26 GMT-3
In going through the archives, I found this gem that I thought I'd bring
out again since it's so cool. The original post can be found at
http://www.groupstudy.com/archives/ccielab/200101/msg02546.html
I modified the configuration to work with ethernet. I tried it this morning an
d it worked great. Check out the original post for more instructions
Here's my version:
R1(host)(e0)-----ethernet------(e0)R2(dlsw peer)(s0)-----------(s0)R3(dlsw
peer)(e0)-----------------(e0)R4(server)
R1
dspu pu ETH1 mac 4000.1010.0001 rsap 4 lsap 4
int e0
mac-addr 4000.3745.0001
dspu enable-pu lsap 4
dspu start ETH1
R2
bridge crb
bridge 1 protocol ieee
dlsw local-peer peer-id 10.1.1.1
dlsw remote-peer 0 tcp 10.1.1.2
dlsw bridge-group 1
int e0
bridge-group 1
int s0
ip addr 10.1.1.1 255.255.255.0
R3
bridge crb
bridge 1 protocol ieee
dlsw local-peer peer-id 10.1.1.2
dlsw remote-peer 0 tcp 10.1.1.1
dlsw bridge-group 1
int e0
bridge-group 1
int s0
ip addr 10.1.1.2 255.255.255.0
R4
dspu host ETH2 xid-snd 01010101 rmac 4000.3745.0001 rsap 4 lsap 4
int e0
dspu enable-host lsap 4
dspu start ETH2
----------------------------------------------------------------
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you received
this in error, please contact the sender and delete the material from any
computer.
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:15 GMT-3