From: Neil Garcia Legada (nlegs@xxxxxxxxx)
Date: Fri Sep 07 2001 - 14:28:01 GMT-3
Hi Group,
I have this setup:
R3-To----CAT3920----To-R2-Et----CAT5K----Et-R1
R3 and R2 token connection to CAT3920 was put to default.
R2 and R1 ethernet connection was put to default also.
R2 is configured for SR/TLB.
Why can't R3 ping to R1's ethernet and vice-versa ??? Something I missed ???
Partial config as follows:
hostname R3
!
interface TokenRing0
ip address 10.0.0.3 255.255.255.0
ring-speed 16
!
hostname R2
!
source-bridge ring-group 20
source-bridge transparent 20 200 1 1
!
interface Ethernet0
no ip address
bridge-group 1
!
interface TokenRing0
no ip address
ring-speed 16
source-bridge 1 1 20
!
bridge 1 protocol ieee
!
hostname R1
!
interface Ethernet0
ip address 10.0.0.1 255.255.255.0
!
Appreciate any comments.
Thanks.
Neil
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:15 GMT-3