RE: Gibberish when first accesing router with term server

From: Williams, Glenn (WILLIAMSG@xxxxxxxxxxxxx)
Date: Fri Sep 07 2001 - 13:25:01 GMT-3

Next message: Roger Sohn: "OSPF over Frame-Relay - Interface-DLCI vs. Map IP/Broadcas"
Previous message: Wendy Malott: "LAB date change"
Maybe in reply to: jim.phillipo@xxxxxxxxxxxx: "Gibberish when first accesing router with term server"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Have not tried it but I heard that the following may contribute to the
gibberish:

logging event subif-link-status
logging event dlci-status-change

-----Original Message-----
From: Robert Hosford [mailto:cisco@certifiednets.com]
Sent: Friday, September 07, 2001 9:44 AM
To: jim.phillipo@guardent.com; ccielab@groupstudy.com
Subject: Re: Gibberish when first accesing router with term server

one the tty lines put no exec
----- Original Message -----
From: <jim.phillipo@guardent.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, September 05, 2001 9:47 AM
Subject: Gibberish when first accesing router with term server

Anyone experience gibberish when first accessing a router via a term server.
I am using a 2600 series router as the term server. Running version 12.0.

Thanks

Jim Phillipo
  Security Engineer
  W: 401.456.1821 F: 781.577.6600 M: 781.983.0316
  75 Third AVE, Waltham, MA 02451 www.guardent.com

Next message: Roger Sohn: "OSPF over Frame-Relay - Interface-DLCI vs. Map IP/Broadcas"
Previous message: Wendy Malott: "LAB date change"
Maybe in reply to: jim.phillipo@xxxxxxxxxxxx: "Gibberish when first accesing router with term server"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:15 GMT-3