From: Steven Weber (itweber@xxxxxxxxxxxxx)
Date: Thu Sep 06 2001 - 16:02:17 GMT-3
if you are using win2k go to the Hilgraeve site and download the newer
version of hyperterm, that should fix any probs you are having
HTH
Steve
----- Original Message -----
From: David Morton <David.Morton@OpenTelecommunications.com>
To: 'Peter Farkas' <pfarkas@cisco.com>; Alex Hsieh <ccie21@hotmail.com>
Cc: <ccielab@groupstudy.com>
Sent: Thursday, September 06, 2001 11:43 AM
Subject: RE: dumb question
> I hate to admit that I'm stumped on this one too. I'm connecting to my
> routers via Win2K telnet to a 2509 acting as a terminal server.
>
> I've tried all the key combinations in the link below, but have no luck.
> Some combos do cause the ############ to shift to a new line, but the IOS
> load continues.
>
> If I directly connect via a console cable, it works flawlessly. Obviously
> I'm missing something simple, so be kind :>
>
> Take care
>
> David
>
> David Morton CCNP, CCDP
> Principal Engineer
> O p e n T e l e c o m m u n i c a t i o n s
> davidm@ot-usa.com
>
>
> -----Original Message-----
> From: Peter Farkas [mailto:pfarkas@cisco.com]
> Sent: Thursday, September 06, 2001 1:43 AM
> To: Alex Hsieh
> Cc: ccielab@groupstudy.com
> Subject: Re: dumb question
>
>
> Here is the page on cco about it:
>
> http://www.cisco.com/warp/public/701/61.html
>
>
> Alex Hsieh wrote:
> >
> > hi group
> >
> > I know this is a silly question,please be patient with me.Can
anyone
> > please tell me what "break sequence" means when you want to change
config
> > register?Thanks for help.
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:15 GMT-3