From: Peter Farkas (pfarkas@xxxxxxxxx)
Date: Thu Sep 06 2001 - 13:08:07 GMT-3
Hi David,
You have to send the break key for the term-serv first.CTRL ]
You will get the promt of the term server and there you can send the
break to the console of the router.
@@@@@@@@
7w0d: %SYS-5-RELOAD: Reload requested
System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
(Press CTRL+] here to get the telnet> prompt of the access server
telnet> send break (the send break will send the break to the console of
the attached router)
PC = 0xfff0a530, Vector = 0x500, SP = 0x680127b0
C2600 platform with 65536 Kbytes of main memory
telnet> send break
PC = 0xfff0a530, Vector = 0x500, SP = 0x80004374
monitor: command "boot" aborted due to user interrupt
rommon 1 >
@@@@@@
Sometimes you have to do the 'send break' command twice. The router
acceps the break only within the first 60 second when it is coming up if
the confreg is 0x2102(default).
Regards,
Peter
David Morton wrote:
>
> I hate to admit that I'm stumped on this one too. I'm connecting to my
> routers via Win2K telnet to a 2509 acting as a terminal server.
>
> I've tried all the key combinations in the link below, but have no luck.
> Some combos do cause the ############ to shift to a new line, but the IOS
> load continues.
>
> If I directly connect via a console cable, it works flawlessly. Obviously
> I'm missing something simple, so be kind :>
>
> Take care
>
> David
>
> David Morton CCNP, CCDP
> Principal Engineer
> O p e n T e l e c o m m u n i c a t i o n s
> davidm@ot-usa.com
>
> -----Original Message-----
> From: Peter Farkas [mailto:pfarkas@cisco.com]
> Sent: Thursday, September 06, 2001 1:43 AM
> To: Alex Hsieh
> Cc: ccielab@groupstudy.com
> Subject: Re: dumb question
>
> Here is the page on cco about it:
>
> http://www.cisco.com/warp/public/701/61.html
>
> Alex Hsieh wrote:
> >
> > hi group
> >
> > I know this is a silly question,please be patient with me.Can anyone
> > please tell me what "break sequence" means when you want to change config
> > register?Thanks for help.
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:15 GMT-3