From: Williams, Glenn (WILLIAMSG@xxxxxxxxxxxxx)
Date: Wed Sep 05 2001 - 11:13:31 GMT-3
Thanks Brad I had that problem too. I also have a problem when rebooting
the terminal server that, for example, I press R2 and then 2 to reestablish
a connection to R2 and get R3 etc. I constantly have to clear line 2 and
then R2 to get to a that router. Problem can happen on any or multiple
routers. One fix I found is to reboot all routers and everything works
normally, but I'd prefer another solution.
GO
-----Original Message-----
From: Brad Ellis [mailto:bellis@ccbootcamp.com]
Sent: Wednesday, September 05, 2001 9:06 AM
To: jim.phillipo@guardent.com; ccielab@groupstudy.com
Subject: Re: Gibberish when first accesing router with term server
Jim,
Make sure you have:
modem Host
transport input all
configured in your async lines on your term server.
-Brad Ellis
CCIE#5796
Network Learning Inc
bellis@optsys.net
used Cisco: www.optsys.net
----- Original Message -----
From: <jim.phillipo@guardent.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, September 05, 2001 9:47 AM
Subject: Gibberish when first accesing router with term server
> Anyone experience gibberish when first accessing a router via a term
server.
> I am using a 2600 series router as the term server. Running version 12.0.
>
> Thanks
>
>
>
> Jim Phillipo
> Security Engineer
> W: 401.456.1821 F: 781.577.6600 M: 781.983.0316
> 75 Third AVE, Waltham, MA 02451 www.guardent.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:14 GMT-3