From: Bob Dixon (bobdixon@xxxxxxxxxxxx)
Date: Wed Sep 05 2001 - 10:52:18 GMT-3
I am assuming that you have just one AC power supply. Are you getting the
same result when you put the power supply in the other slot and try to turn
the switch on? Can you see if one of the pins where the power supply
connects to the mainboard is bent or broken? Does the connector on the back
of the power supply itself look to be in good condition (ie. nothing stuck
in the connector)?
Other than this, I would agree with everyone else and say to remove all of
the modules and see if it will come up.
Bob
----- Original Message -----
From: Alex Hsieh <ccie21@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, September 04, 2001 10:25 PM
Subject: Cat 5000 problem
> hi group
>
> I just purchased a Catalyst 5000 switch from ebay.But this switch
> doesn't even power up when I first test it.Power supply seems to be fine
> because it does power up when taking away from chassis.However,when I
fasten
> power supply to chassis,the whole switch doesn't power up(power supply not
> functioning).Does anybody know what might have caused the problem?Thank
you
> for your help.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:14 GMT-3