From: Brian (signal@xxxxxxxxxx)
Date: Sun Sep 02 2001 - 21:56:35 GMT-3
Jeff,
qsaal (0/5) is not needed for ilmi-auto-discovery, only
ilmi (0/16) is needed.
Brian
On Sun, 2 Sep 2001, Jeff Kesemeyer wrote:
> Use ilmi-auto-discovery -
> configure ilmi and qsaal.
> Use show atm pvc or show atm vc to display the VPI/VCI of any PVC's the
> router discovers.
>
> interface ATM0/0
> atm pvc 1 0 16 ilmi
> ! Configs ilmi
> atm pvc 2 0 5 qsaal
> ! Configs qsaal
> atm ilmi-pvc-discovery
> ! Enables ilmi-pvc-discovery
>
>
> Jeff Kesemeyer
> CCNP, CCDP, MCSE, CNE
> www.bradshawlabs.com
> "Your CCIE Rack Rental Source"
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Nicholas Jaksec
> Sent: Sunday, September 02, 2001 7:35 PM
> To: CCIE
> Subject: ATM Question
>
>
> I am trying to setup and ATM connection and cannot determine the VPI/VCI
> values from the switch. How can I discover the VPI/VCI values from an ATM
> interface. Any help would be great, thanks !!
>
>
>
> ********************************************
> Nicholas R. Jaksec, CCNP, CCDP, MCSE+I, CNA
> Network Systems Engineer
> Lucent Worldwide Services
> One North Shore Center
> 12 Federal St. Suite 420
> Pittsburgh, Pa 15212
> Office: 412-330-6336 Fax: 412-323-7665
> Pager: 1-800-467-1467
> Email: jaksec@lucent.com
> ********************************************
> **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
-----------------------------------------------
I'm buying / selling used CISCO gear!!
email me for a quote
Brian Feeny, CCIE #8036 Netjam, LLC
signal@netjam.net http://www.netjam.net
VISA/MC/AMEX/COD phone: 318-212-0245
30 day warranty fax: 318-212-0246
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:13 GMT-3