From: Jeff Kesemeyer (jkesemey@xxxxxxxxxxxxx)
Date: Sun Sep 02 2001 - 21:13:22 GMT-3
Use ilmi-auto-discovery -
configure ilmi and qsaal.
Use show atm pvc or show atm vc to display the VPI/VCI of any PVC's the
router discovers.
interface ATM0/0
atm pvc 1 0 16 ilmi
! Configs ilmi
atm pvc 2 0 5 qsaal
! Configs qsaal
atm ilmi-pvc-discovery
! Enables ilmi-pvc-discovery
Jeff Kesemeyer
CCNP, CCDP, MCSE, CNE
www.bradshawlabs.com
"Your CCIE Rack Rental Source"
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Nicholas Jaksec
Sent: Sunday, September 02, 2001 7:35 PM
To: CCIE
Subject: ATM Question
I am trying to setup and ATM connection and cannot determine the VPI/VCI
values from the switch. How can I discover the VPI/VCI values from an ATM
interface. Any help would be great, thanks !!
********************************************
Nicholas R. Jaksec, CCNP, CCDP, MCSE+I, CNA
Network Systems Engineer
Lucent Worldwide Services
One North Shore Center
12 Federal St. Suite 420
Pittsburgh, Pa 15212
Office: 412-330-6336 Fax: 412-323-7665
Pager: 1-800-467-1467
Email: jaksec@lucent.com
********************************************
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:13 GMT-3