RE: 3920 Token Ring Switch Question

From: andrew.waldwyn@xxxxxx
Date: Sun Sep 02 2001 - 05:51:04 GMT-3


   
Neil,

Try "multiring ip" under your token ring interfaces.
The problem is that the router is sending the IP packets without RIF. As the
catalyst is configured to do SRB between both VLANs it will drop all the
frames that don't carry the RIF.

Regards

Andy

-----Original Message-----
From: Neil Garcia Legada [mailto:nlegs@visto.com]
Sent: 02 September 2001 06:58
To: ccielab@groupstudy.com
Subject: 3920 Token Ring Switch Question

Hello Group,

Below are my configurations on cat3920. Routers are attached using ports as
per the CDP info. TrBRF's were defined with corresponding TrCRF's under it.
Ports are then assigned to TrCRF's accordingly.

When SRB bridging mode is used on TrCRF's, why is it that ping from r3 to r8
is unsuccessful ??? But when I changed the bridging mode to SRT I was able
to ping r8 from r3. Is there a way to make it work using SRB on TrCRF's ???
I'm kind of confuse about those bridging mode.

Appreciate any feedback.

Thanks,
Neil

*******

                           VTP VLAN Configuration

 TrBRF/TrCRF ID Brdg/Rng Ports Local
State
 TrBRF100 100 0x01
preferred
     TrCRF10 10 auto yes
preferred
     TrCRF11 11 auto yes
preferred
 TrBRF200 200 0x01
preferred
     TrCRF20 20 auto yes
preferred
 trbrf-default 1005 0x0F
preferred
     trcrf-default 1003 0xCCC yes
preferred

                       Local VLAN Port Configuration

Port Mode TrCRF TrBRF
  3 Static TrCRF10 TrBRF100
  8 Static TrCRF11 TrBRF100
 13 Static TrCRF20 TrBRF200

                            CDP Neighbor Display

Box Local Prt Device ID Remote Prt Net Address Platform
 1 3 r3 TokenRing0 10.0.0.3 cisco 2523
 1 8 r8 TokenRing0 10.0.0.8 cisco 2500
 1 13 r13 TokenRing1 10.0.0.13 cisco RP1

                   VLAN Parameter Configuration for TrBRF

         VLAN ID 100
         VLAN Name TrBRF100

         State Operational

         MTU 4472
         Bridge Number 0x01

         VLAN ID 200
         VLAN Name TrBRF200

         State Operational

         MTU 4472
         Bridge Number 0x01

                   VLAN Parameter Configuration for TrCRF

         VLAN ID 10
         VLAN Name TrCRF10
         Parent VLAN TrBRF100
         State Operational

         Ring Number auto
         Bridging Mode SRB
         Max ARE Bridge Hop Count 7
         Max STE Bridge Hop Count 7
         Backup CRF No

         Ports in TrCRF 3

         VLAN ID 11
         VLAN Name TrCRF11
         Parent VLAN TrBRF100
         State Operational

         Ring Number auto
         Bridging Mode SRB
         Max ARE Bridge Hop Count 7
         Max STE Bridge Hop Count 7
         Backup CRF No

         Ports in TrCRF 8

         VLAN ID 20
         VLAN Name TrCRF20
         Parent VLAN TrBRF200
         State Operational

         Ring Number auto
         Bridging Mode SRT
         Max ARE Bridge Hop Count 7
         Max STE Bridge Hop Count 7
         Backup CRF No

         Ports in TrCRF 13

hostname r3
!
!
ip subnet-zero
ip tcp synwait-time 5
no ip domain-lookup
!
interface TokenRing0
 ip address 10.0.0.3 255.255.255.0
 no ip directed-broadcast
 ring-speed 16
!

hostname r8
!
!
ip subnet-zero
ip tcp synwait-time 5
no ip domain-lookup
!
interface TokenRing0
 ip address 10.0.0.8 255.255.255.0
 no ip directed-broadcast
 ring-speed 16
end



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:13 GMT-3