RE: What CIR does my service provider is giving.

From: Miller, Nathan - Perot (NHMiller@xxxxxxx)
Date: Thu Aug 30 2001 - 13:11:17 GMT-3

   
Try "show frame-relay map" when using cisco LMI.

-----Original Message-----
From: Joseph Ezerski [mailto:jezerski@broadcom.com]
Sent: Thursday, August 30, 2001 8:52 AM
To: ccielab@groupstudy.com
Subject: RE: What CIR does my service provider is giving.

Hmmm, I tried this on my lab rack and it did not work. I tried LMI type of
ANSI and Cisco. Router Version is 12.1(1)T. Frame Switch is at 11.2(22).
It may not work for me as the Cisco Frame Switch is not really a true Frame
Switch in the enterprise sense.

3d14h: Serial0/0(in): Status, myseq 16
3d14h: RT IE 1, length 1, type 1
3d14h: KA IE 3, length 2, yourseq 16, myseq 16

3d14h: Serial0/0(out): StEnq, myseq 17, yourseen 16, DTE up
3d14h: datagramstart = 0x3C01D94, datagramsize = 13
3d14h: FR encap = 0xFCF10309
3d14h: 00 75 01 01 01 03 02 11 10
3d14h:
3d14h: Serial0/0(in): Status, myseq 17
3d14h: RT IE 1, length 1, type 1
3d14h: KA IE 3, length 2, yourseq 17, myseq 17

-Joe

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Bill Cropper
Sent: Thursday, August 30, 2001 3:19 AM
To: vicarsb@WellsFargo.COM
Cc: raj_lab@yahoo.com; ccielab@groupstudy.com
Subject: RE: What CIR does my service provider is giving.

'debug frame-relay lmi' will show you the cir, read:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12supdoc/deb
ug_r/ddlsw.htm#xtocid2447563

This document also states that this command does not generate much output.
So you need not worry about production routers. 

--
Bill Cropper

On Wed, 29 Aug 2001 vicarsb@WellsFargo.COM wrote:

> Depending upon the LMI type used, the show frame relay map command will
show
> the cir  (BW =)
>
> router#sh frame-relay map
> Serial1/0.202 (up): point-to-point dlci, dlci 202(0xCA,0x30A0), broadcast,
> BW = 256000
>           status defined, active
> Serial1/0.167 (down): point-to-point dlci, dlci 167(0xA7,0x2870),
broadcast,
> BW = 48000
>
> LMI of Cisco will show CIR info.  LMI of ANSI will not.  This the the LMI
> type that the carriers send out.  Changing the LMI on the router will not
> change what the carrier sends.
>
> -----Original Message-----
> From: Rajeev Siddappa [mailto:raj_lab@yahoo.com]
> Sent: Wednesday, August 29, 2001 10:05 AM
> To: ccielab@groupstudy.com
> Subject: What CIR does my service provider is giving.
>
>
> Hi
>
> Is ther any tool in the Cisco router or any software
> which can help me to find
>
> 1. What is the CIR provide by my service provider.
>
> Thank you,
> Rajeev.
>

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:00 GMT-3