RE: EIGRP passive-interface question

From: Annu (annu_roopa@xxxxxxxxx)
Date: Thu Aug 30 2001 - 12:19:57 GMT-3


   
Rob,

As i know when u set passive interface in EIGRP the
hellos wont go thru and neighbor relationship wont be
formed depending on how its configured at other end.
A similiar sol can be achived using "Distribute list".

Read thru this 1 page URL and it will explain it
all.HTH.

http://www.cisco.com/warp/public/103/16.html

Bye,
Annu

--- Wade Edwards <wade.edwards@powerupnetworks.com>
wrote:
> You have to set a distribute list out to filter the
> route from being
> advertised to other EIGRP routers. EIGRP will
> advertise the route even
> though the interface is passive.
>
> -----Original Message-----
> From: rob.chee@us.pwcglobal.com
> [mailto:rob.chee@us.pwcglobal.com]
> Sent: Thursday, August 30, 2001 9:21 AM
> To: ccielab@groupstudy.com
> Subject: EIGRP passive-interface question
>
>
> Given the following configuration, will EIGRP
> advertise the network on
> ethernet 0?
>
> int e0
> ip address 172.16.5.5/24
>
> int e1
> ip address 172.16.6.6/24
>
> router eigrp 10
> network 172.16.0.0
> passive-interface e0
>
>
>
> According to CCbootcamp lab 18, it should not.
> According to the Cisco
> documentation at the following link, it will.
>
> http://www.cisco.com/warp/public/103/eigrpfaq.html
>
> When I was doing the lab 18 I couldn't get the
> network under the passive
> interface to disappear. Does anyone know how to
> keep the 172.16.5.0/24
> network from being advertised using passive
> interfaces?
>
> Rob
>
----------------------------------------------------------------
> The information transmitted is intended only for the
> person or entity to
> which it is addressed and may contain confidential
> and/or privileged
> material. Any review, retransmission, dissemination
> or other use of, or
> taking of any action in reliance upon, this
> information by persons or
> entities other than the intended recipient is
> prohibited. If you
> received
> this in error, please contact the sender and delete
> the material from
> any
> computer.
> **Please
> read:http://www.groupstudy.com/list/posting.html
> **Please
> read:http://www.groupstudy.com/list/posting.html
>



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:00 GMT-3