From: Roberto (twinturbos@xxxxxxxxxxxx)
Date: Tue Aug 28 2001 - 19:13:00 GMT-3
There is no need to inverse mux at the physical layer. Multilink PPP for
the 3600 series(all) works great. Check out Cisco's web site. Go to
Technologies-->>PPP.
Regards,
Twinturbos(Real Turbos)
Not the Mitsubishi Crap
----- Original Message -----
From: "vr4drvr ." <adrian36@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, August 28, 2001 3:26 PM
Subject: Re: Binding two T1 circuits.
> You can also inverse mux the two T1's to look like a 3Meg pipe and connect
> it directly to a serial int. No need to mess with multilink ppp. Just
> another option....
>
>
>
> >From: "DAN DORTON" <DHSTS68@dhs.state.il.us>
> >Reply-To: "DAN DORTON" <DHSTS68@dhs.state.il.us>
> >To: <BSantarsiero@greenwichtech.com>, <ccielab@groupstudy.com>,
> ><pjm@roadrunner.nf.net>, <raj_lab@yahoo.com>
> >Subject: Re: Binding two T1 circuits.
> >Date: Tue, 28 Aug 2001 13:49:12 -0500
> >
> >Works on my 3640.
> >
> >Version 11.2 (18) P release fc1
> >
> >Dan
> >
> > >>> "Patrick" <pjm@roadrunner.nf.net> 08/28/01 01:31PM >>>
> >Is PPP Multilink avaiable on the 3600 series?
> >
> >If so what code revision....
> >----- Original Message -----
> >From: "Santarsiero, Bill" <BSantarsiero@greenwichtech.com>
> >To: "'Rajeev Siddappa '" <raj_lab@yahoo.com>; <ccielab@groupstudy.com>
> >Sent: Tuesday, August 28, 2001 3:17 PM
> >Subject: RE: Binding two T1 circuits.
> >
> >
> > > There is also using ppp encapsulation, and then binding the two with
ppp
> > > multilink. I see it has already been implemented in the network where
I
> >am
> > > currently consulting. There are no issues as far as I know.
> > >
> > > HTH,
> > > Bill
> > >
> > > -----Original Message-----
> > > From: Rajeev Siddappa
> > > To: ccielab@groupstudy.com
> > > Sent: 8/28/01 12:22 PM
> > > Subject: Binding two T1 circuits.
> > >
> > > Hi,
> > >
> > > I am lloking at Binding two T1 circuits on Cisco 3640
> > > and 7206.
> > >
> > > Does any one has designed any solution on this. Pls
> > > mail me the dteials and the H/w and the software
> > > requirements.
> > >
> > > Thank you,
> > > Rajeev.
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:59 GMT-3