From: Mike Schlenger (mschlenger@xxxxxxxxxxxxxxxx)
Date: Mon Aug 27 2001 - 14:01:38 GMT-3
I've seen this before. I would ignore the config output and focus on your
show commands to verify your configuration.
Mike
Mike Schlenger
CCIE #7079
-----Original Message-----
From: xujing@31942.org [mailto:xujing@31942.org]
Sent: Sunday, August 26, 2001 1:00 PM
To: CCIELab
Subject: OSPF priority
Hi, CCIELab:
I did the following configuration:
inter s1/0 <======Branch
encap fram
ip ospf prio 10
router ospf 1
neigh 64.108.254.101 prio 10
The first time, I "show run", I can see everything is OK. But after some
seconds, I find the "neigh 64.108.254.101 prio 10" change to "neigh
64.108.254.101 prio 1" automatically.
Why!!! My IOS ver is 12.0.7T &12.0.5T1.
Pls help me!!!
Best Regards!!!
Xu Jing
xujing@e-ccsi.org
*********************
CCSI:21130
CNE,CCNP,CLP
*********************
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:58 GMT-3