From: Peng Li (lipeng@xxxxxxxxxx)
Date: Mon Aug 27 2001 - 08:03:21 GMT-3
----- Original Message -----
From: Peng Li
To:
Sent: Sunday, August 26, 2001 7:51 PM
Subject: IPX DDR
Sorry, I just copy & paste some content from Cisco web site. Maybe the reason f
or unreadable content is the file is on Html .
any thing related to this monster?
What's the XNS and IPX relationship, is it ok to disable XNS? I'm on 12.2versio
n IOS, why I get this?
Tks.
The xns flood broadcast net-zero command sends broadcast packets to all hosts (
as indicated by the host address FFFF.FFFF.FFFF) on the local network (as indic
ated by the network address 0). This broadcast configuration is required in som
e 3Com environments.
Flooding is applied to the packets received on an interface.
-------------------------------------------------------------------------------
-
Note The XNS networking protocol will no longer be offered after Cisco IOS R
elease 12.2. XNS commands will not appear in future releases of the Cisco IOS s
oftware documentation set.
----- Original Message -----
From: Peng Li
To:
Sent: Saturday, August 25, 2001 9:44 PM
Subject: Help with IPX DDr
Hi, I tried with DDR IPX,
1. when ever I config with "floating" keyword, it asks me to use IPX WAN ? why?
2. I deny rip/sap/eigrp/nlsp/457, but the following bring up link every 2 mins,
what's this?
I tried to filter with s=0.0000.0000.0000, d=0.ffff.ffff.ffff) or even with SP
ort Dport with 9004, doen't help.
Any comments.
07:56:01: BR2/0 DDR: rotor dialout [priority]
07:56:01: BR2/0 DDR: Dialing cause ipx (s=0.0000.0000.0000, d=0.ffff.ffff.ffff)
07:56:01: BR2/0 DDR: Attempting to dial 3647481
07:56:01: IPX: local:0.0000.0000.0000->0.ffff.ffff.ffff ln=576 tc=00 pt=04 ds=9
0
04 ss=9004, encap failed
07:56:01: ISDN BR2/0: TX -> SETUP pd = 8 callref = 0x08
07:56:01: Bearer Capability i = 0x8890
07:56:01: Channel ID i = 0x83
07:56:01: Keypad Facility i = '3647481'
07:56:01: ISDN BR2/0: RX <- CALL_PROC pd = 8 callref = 0x88
07:56:01: Channel ID i = 0x89
07:56:02: ISDN BR2/0: RX <- CONNECT pd = 8 callref = 0x88
07:56:02: Channel ID i = 0x89
07:56:02: %LINK-3-UPDOWN: Interface BRI2/0:1, changed state to up
07:56:02: BR2/0:1: interface must be fifo queue, force fifo
07:56:02: %DIALER-6-BIND: Interface BR2/0:1 bound to profile Di0
07:56:02: ISDN BR2/0: TX -> CONNECT_ACK pd = 8 callref = 0x08
07:56:04: BR2/0:1 DDR: dialer protocol up
07:56:05: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI2/0:1, changed sta
t
e to up
07:56:08: %ISDN-6-CONNECT: Interface BRI2/0:1 is now connected to 3647481 unkno
w
n
07:56:21: IPX: local:0.0000.0000.0000->0.ffff.ffff.ffff ln=576 tc=00 pt=04 ds=9
0
04 ss=9004, encap failed
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:58 GMT-3