From: Steven Weber (itweber@xxxxxxxxxxxxx)
Date: Sun Aug 26 2001 - 21:37:52 GMT-3
cute :-) !!!!
----- Original Message -----
From: Todd Veillette <tveillette@home.com>
To: Jeongwoo Park <jpark@wams.com>
Cc: <ccielab@groupstudy.com>
Sent: Sunday, August 26, 2001 5:38 PM
Subject: RE: CIR on Frame-relay
> Hi,
>
> Generally speaking, as long as there's more BW on the backbone,
> no problem. But it does depend on circuit design.
>
> The unwritten norm is CIR is 50% of circuit. The hardware stop
> is port speed. If you have a fractional T1 with a port speed of
> 256K on a spoke, a full T on the hub and a CIR of 128K your
> burstable to 256K, and also hardware limited to 256K.
>
> Now if it's 3:30 PM EST and Cisco just announced a 500% increase
> over projected quarterly gains, right after the fed announced
> a 1.4% drop in unemployment on the last Friday of the quarter, the
> same morning Pfizer announced they have successfully developed
> a pill that does the same for women as Viagara does for men...
>
> then maybe you won't get the burstable speed to 256K but you still
> get the 128K. :-)
>
> -Todd
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Jeongwoo Park
> Sent: Sunday, August 26, 2001 4:48 PM
> To: 'ccielab@groupstudy.com'
> Subject: CIR on Frame-relay
>
>
> Hi all
> Quick question for you guys.
> What happens if data transfer rate in frame relay exceed CIR?
> Would there be a delay or retransmission?
>
> What if Voice transfer rate in Frame relay exceed CIR?
>
> Thanks in adv.
>
> JP
> **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:58 GMT-3