From: Jason1 (jason1@xxxxxxxxxx)
Date: Sat Aug 25 2001 - 06:54:23 GMT-3
I finally got it figure out and it's now working great. This is probably
off-topic and that's probably why nobody replied.. LOL... Thanks.
----- Original Message -----
From: "Jason1" <jason1@v-labs.net>
To: "Tymann, John" <John.Tymann@netigy.com>; <ccielab@groupstudy.com>
Sent: Saturday, August 25, 2001 4:56 PM
Subject: Re: CatTools for Cisco Routers
> You didn't mentioned how you get it to work... adding the port number
didn't
> work because the Router will still be waiting for a Carriage Return
whereas
> the CatTools is waiting for a Password prompt and both ended up timing
> out....
>
> Jason
>
> ----- Original Message -----
> From: "Tymann, John" <John.Tymann@netigy.com>
> To: "Jason1" <jason1@v-labs.net>; <ccielab@groupstudy.com>
> Sent: Thursday, August 23, 2001 2:24 AM
> Subject: RE: CatTools for Cisco Routers
>
>
> > Just add the port number after the IP address in the database manager.
> >
> > Works like a champ!
> >
> > -----Original Message-----
> > From: Jason1 [mailto:jason1@v-labs.net]
> > Sent: Wednesday, August 22, 2001 12:14 PM
> > To: ccielab@groupstudy.com
> > Subject: CatTools for Cisco Routers
> >
> >
> > Has anybody got CatTools from Kiwi-Enterprise to work with Cisco Routers
> > through a Comms Server...
> >
> > i.e. Reverse Telnet....
> > **Please read:http://www.groupstudy.com/list/posting.html
> > **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:57 GMT-3