From: perkinsr@xxxxxxxxxxxxxx
Date: Fri Aug 24 2001 - 11:08:12 GMT-3
It has been my experience that Sniffer will work with just about any card,
but to see low level ethernet errors you have to have a supported card,
other cards just discard errored frames. They will all see the working
frames, so if you are trouble shooting IP or TCP problems or even most
ehternet problems you can use any card.
Ray
-----Original Message-----
From: Mike Hennigan [mailto:Mikeh@wnycs.com]
Sent: Friday, August 24, 2001 6:32 AM
To: andrew.2.shore@bt.com
Cc: ccielab@groupstudy.com
Subject: RE: way OT: Sniffer Pro 4.5
Running Win2K, I saw on there website they have support for Xircom and Madge
cards but I was hoping there was some way to get support for others
>>> <andrew.2.shore@bt.com> 08/24/01 09:26AM >>>
you need to install the network compnent in network settings (what OS are
you using)
Andrew Shore. CCNP+Security, MCSE, CCP, BSc
Network Consultant
Internetworking Solutions Limited
-----Original Message-----
From: Mike Hennigan [mailto:Mikeh@wnycs.com]
Sent: 24 August 2001 14:10
To: ccielab
Subject: way OT: Sniffer Pro 4.5
I am running Sniffer Pro 4.5 on my OmniBook 6000 with the builtin ethernet
nic. Sniffer won't pick up the NIC when it starts up .... any suggestions?
Michael Hennigan, CCIE# 7993
Sr. Systems Engineer
Infrastructure Specialist
Western New York Computing System
Phone: 716-250-3700
Cell: 716-553-1124
BEGIN:VCARD
VERSION:2.1
X-GWTYPE:USER
FN:Mike Hennigan
EMAIL;WORK;PREF;NGW:Mikeh@wnycs.com
N:Hennigan;Mike
X-GWUSERID:Mikeh
END:VCARD
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:57 GMT-3