From: Jason Gardiner (gardiner@xxxxxxxxxx)
Date: Thu Aug 23 2001 - 21:45:38 GMT-3
You need to add the nlsp multicast comand for ethernet/NBMA.
Thanks,
Jason Gardiner
Supervisor, Engineering Services
Sprint E|Solutions
"You can swim all day in the Sea of Knowledge and
still come out completely dry. Most people do."
- Norton Juster
On Fri, 24 Aug 2001, Jason Sinclair wrote:
> Hi,
>
> I have configured NLSP as follows:
>
> Router1
> Int fa0/0
> Ipx netw 54
> Ipx nlsp enable
>
> Ipx router nlsp
> Area-address 0 0
>
> Router2
> Int fa0/0
> Ipx netw 54
> Ipx nlsp enable
>
> Ipx router nlsp
> Area-address 0 0
>
>
> When i debug ipx nlsp adj I receive the following:
>
> NLSP-Adj: Encapsulation failed for L1 LAN IIH on FastEthernet0/0
>
> Any ideas what is wrong?
>
> Thanks,
>
> Jason Sinclair
> Team Leader - NSG
> POWERTEL Limited
> Level 11, 55 Clarence Street, SYDNEY
> Phone: 61-2-8264-3820
> Mobile: 0416 105 858
> jasons@powertel.net.au
>
>
>
>
> **********************************************************************
> This email (including all attachments) is intended solely for the named
> addressee. It is confidential and may contain commercially sensitive
> information. If you receive it in error, please let us know by reply email,
> delete it from your system and destroy any copies.
>
> This email is also subject to copyright. No part of it should be reproduced,
> adapted or transmitted without the prior written consent of the copyright own
er.
>
> Emails may be interfered with, may contain computer viruses or other defects
> and may not be successfully replicated on other systems. We give no
> warranties in relation to these matters. If you have any doubts about
> the authenticity of an email purportedly sent by us, please contact us
> immediately.
>
> **********************************************************************
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:57 GMT-3