From: wiwanczyk@xxxxxxxxxx
Date: Thu Aug 23 2001 - 10:23:16 GMT-3
Message follows:
****************************************
I did, it just doesn't works cause what it does is that it ends up waiting
for the password prompt when it got to the router..
I.e. it can go to the routers that is connected to the Comms Server but
cannot collect the config since it's expecting a password prompt..... And
the router is expecting a RETURN before it shows the password prompt....
So how did you get the champ to work ?
----- Original Message -----
From: "Tymann, John" <John.Tymann@netigy.com>
To: "Jason1" <jason1@v-labs.net>; <ccielab@groupstudy.com>
Sent: Thursday, August 23, 2001 2:24 AM
Subject: RE: CatTools for Cisco Routers
> Just add the port number after the IP address in the database manager.
>
> Works like a champ!
>
> -----Original Message-----
> From: Jason1 [mailto:jason1@v-labs.net]
> Sent: Wednesday, August 22, 2001 12:14 PM
> To: ccielab@groupstudy.com
> Subject: CatTools for Cisco Routers
>
>
> Has anybody got CatTools from Kiwi-Enterprise to work with Cisco Routers
> through a Comms Server...
>
> i.e. Reverse Telnet....
> **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:56 GMT-3