From: SALMON, MARK (SBMS) (MARK.SALMON@xxxxxxxxxxxx)
Date: Tue Aug 21 2001 - 22:06:49 GMT-3
I am using wic 1ts in my fram relay set up and no problems so far. My ****
used 2502 routers are behaving really badly. My tr interface ails, my
serial interfaces fails and one router even stop booting. It is so
frustrating.
3 weeks to go for my time.
Mark Salmon
Sr. WAN Engineer Great Lakes Region
Cingular Wireless
2000 Ameritech Center Drive 3F07B
Hoffman Estates IL 60195
Voice: (847)765-3999
Pager: (847)992-0458
Email: mark.salmon@cingular.com
-----Original Message-----
From: Justin Braunagel [mailto:Justin.Braunagel@vlsystems.com]
Sent: Tuesday, August 21, 2001 8:04 PM
To: SALMON, MARK (SBMS); David Siwula; Ccielab@Groupstudy. Com (E-mail)
Subject: RE: ot frame cloud acting up
Mark,
Here are the printouts. This one really has me stumped and I've done a
lot of Frame Relay. My gut feeling is that it is something with the
WIC-1T cards. The config is pretty straightforward; nothing fancy at
all, just your basic hub and spoke stuff. And I've used two different
versions of general deployment IOS as well, tried different clock
speeds, etc...
Any ideas would be greatly appreciated. 5 months to go until the lab.
Dave and I are taking it together....
Thanks,
Justin
-----Original Message-----
From: SALMON, MARK (SBMS) [mailto:MARK.SALMON@cingular.com]
Sent: Tuesday, August 21, 2001 5:56 PM
To: 'David Siwula'; Ccielab@Groupstudy. Com (E-mail)
Cc: Justin Braunagel
Subject: RE: ot frame cloud acting up
Can you send the sho frame PVC and sho fram map on the end point
routers?
Mark Salmon
Sr. WAN Engineer Great Lakes Region
Cingular Wireless
2000 Ameritech Center Drive 3F07B
Hoffman Estates IL 60195
Voice: (847)765-3999
Pager: (847)992-0458
Email: mark.salmon@cingular.com
-----Original Message-----
From: David Siwula [mailto:DSiwula@ceira.com]
Sent: Tuesday, August 21, 2001 7:30 PM
To: Ccielab@Groupstudy. Com (E-mail)
Cc: Justin Braunagel (E-mail); David Siwula
Subject: ot frame cloud acting up
If anyone has a chance can they help out with this frame cloud config?
For some reason the 2600's are acting very strange.
Thanks, Dave
-----Original Message-----
From: Justin Braunagel [mailto:Justin.Braunagel@vlsystems.com]
Sent: Tuesday, August 21, 2001 5:27 PM
To: David Siwula
Subject: RE: VSwitch 3920 2.0
Dave,
Here's the issue on the WAN problems:
I cannot get my 2611 routers to communicate thru a 2522 functioning as a
Frame Relay switch. I have 2500's hooked up that work just fine.
When you bring up the connection, the interface and line protocols go to
up and the DLCI's go active. After about 10-15 seconds, the DLCI's go
inactive, the line protocol goes down and the DLCI's go to deleted. I
have tried different clock speeds, different IOS (currently on 12.0-18)
and using know good crossover cables to the 2522. I'm wondering if it
is an issue with the WIC-1T cards in the 2600 routers as the 2500's are
working fine, with the exception of one of them.
I attaching current configs to check out. R1's Serial0/0 is attached to
R8's Serial1. R2's Serial0/0 is attached to R8's Serial2. Standard
crossover cables that work fine on the 2500's are being used.
If anyone has a clue on this, it would be greatly appreciated as it's
really putting a damper in finishing the functional setup of my CCIE
lab.
Thanks...Justin
Frame-Switch-R8#sho conf
Using 3446 out of 32762 bytes
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Frame-Switch-R8
!
!
ip subnet-zero
no ip domain-lookup
frame-relay switching
!
!
!
!
!
interface Ethernet0
no ip address
no ip directed-broadcast
shutdown
!
interface Serial0
no ip address
no ip directed-broadcast
no ip mroute-cache
shutdown
!
interface Serial1
no ip address
no ip directed-broadcast
encapsulation frame-relay
logging event subif-link-status
logging event dlci-status-change
clockrate 64000
frame-relay lmi-type cisco
frame-relay intf-type dce
frame-relay route 102 interface Serial2 101
frame-relay route 103 interface Serial3 101
frame-relay route 104 interface Serial4 101
frame-relay route 105 interface Serial5 101
frame-relay route 106 interface Serial6 101
!
interface Serial2
no ip address
no ip directed-broadcast
encapsulation frame-relay
logging event subif-link-status
logging event dlci-status-change
clockrate 64000
frame-relay lmi-type cisco
frame-relay intf-type dce
frame-relay route 101 interface Serial1 102
frame-relay route 103 interface Serial3 102
frame-relay route 104 interface Serial4 102
frame-relay route 105 interface Serial5 102
frame-relay route 106 interface Serial6 102
!
interface Serial3
no ip address
no ip directed-broadcast
encapsulation frame-relay
logging event subif-link-status
logging event dlci-status-change
clockrate 64000
frame-relay lmi-type cisco
frame-relay intf-type dce
frame-relay route 101 interface Serial1 103
frame-relay route 102 interface Serial2 103
frame-relay route 104 interface Serial4 103
frame-relay route 105 interface Serial5 103
frame-relay route 106 interface Serial6 103
!
interface Serial4
no ip address
no ip directed-broadcast
encapsulation frame-relay
logging event subif-link-status
logging event dlci-status-change
clockrate 64000
frame-relay lmi-type cisco
frame-relay intf-type dce
frame-relay route 101 interface Serial1 104
frame-relay route 102 interface Serial2 104
frame-relay route 103 interface Serial3 104
frame-relay route 105 interface Serial5 104
frame-relay route 106 interface Serial6 104
!
interface Serial5
no ip address
no ip directed-broadcast
encapsulation frame-relay
logging event subif-link-status
logging event dlci-status-change
clockrate 64000
frame-relay lmi-type cisco
frame-relay intf-type dce
frame-relay route 101 interface Serial1 105
frame-relay route 102 interface Serial2 105
frame-relay route 103 interface Serial3 105
frame-relay route 104 interface Serial4 105
frame-relay route 106 interface Serial6 105
!
interface Serial6
no ip address
no ip directed-broadcast
encapsulation frame-relay
logging event subif-link-status
logging event dlci-status-change
clockrate 64000
frame-relay lmi-type cisco
frame-relay intf-type dce
frame-relay route 101 interface Serial1 106
frame-relay route 102 interface Serial2 106
frame-relay route 103 interface Serial3 106
frame-relay route 104 interface Serial4 106
frame-relay route 105 interface Serial5 106
!
interface Serial7
no ip address
no ip directed-broadcast
shutdown
!
interface Serial8
no ip address
no ip directed-broadcast
shutdown
!
interface Serial9
no ip address
no ip directed-broadcast
shutdown
!
interface BRI0
no ip address
no ip directed-broadcast
shutdown
!
ip classless
!
!
!
line con 0
transport input none
line aux 0
line vty 0 4
!
end
R1-2611-1#sho conf
Using 1080 out of 29688 bytes
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname R1-2611-1
!
!
ip subnet-zero
no ip domain-lookup
!
!
!
!
!
!
!
interface Ethernet0/0
ip address 192.168.1.1 255.255.255.0
no ip directed-broadcast
!
interface Serial0/0
no ip address
no ip directed-broadcast
encapsulation frame-relay
no ip mroute-cache
logging event subif-link-status
logging event dlci-status-change
nrzi-encoding
frame-relay lmi-type cisco
!
interface Serial0/0.1 multipoint
ip address 172.16.1.1 255.255.255.0
ip directed-broadcast
frame-relay map ip 172.16.1.3 103
frame-relay map ip 172.16.1.4 104
frame-relay map ip 172.16.1.5 105
frame-relay map ip 172.16.1.6 106
frame-relay map ip 172.16.1.2 102
frame-relay interface-dlci 101
!
interface Ethernet0/1
no ip address
no ip directed-broadcast
shutdown
!
interface Serial0/1
no ip address
no ip directed-broadcast
shutdown
!
ip classless
ip route 0.0.0.0 0.0.0.0 Serial0/0
!
!
!
line con 0
transport input none
line aux 0
line vty 0 4
!
no scheduler allocate
end
R2-2611-2#sho conf
Using 1068 out of 29688 bytes
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname R2-2611-2
!
!
ip subnet-zero
no ip domain-lookup
!
!
!
!
!
!
!
interface Ethernet0/0
ip address 192.168.1.2 255.255.255.0
no ip directed-broadcast
!
interface Serial0/0
no ip address
no ip directed-broadcast
encapsulation frame-relay
no ip mroute-cache
logging event subif-link-status
logging event dlci-status-change
frame-relay lmi-type cisco
!
interface Serial0/0.1 multipoint
ip address 172.16.1.2 255.255.255.0
no ip directed-broadcast
frame-relay map ip 172.16.1.3 103
frame-relay map ip 172.16.1.4 104
frame-relay map ip 172.16.1.5 105
frame-relay map ip 172.16.1.6 106
frame-relay map ip 172.16.1.1 101
frame-relay interface-dlci 102
!
interface Ethernet0/1
no ip address
no ip directed-broadcast
shutdown
!
interface Serial0/1
no ip address
no ip directed-broadcast
shutdown
!
ip classless
ip route 0.0.0.0 0.0.0.0 Serial0/0
!
!
!
line con 0
transport input none
line aux 0
line vty 0 4
!
no scheduler allocate
end
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:55 GMT-3