From: Tony Ng (tonyng42@xxxxxxx)
Date: Tue Aug 21 2001 - 15:31:26 GMT-3
I have not configured ISDN snapshot routing before, but may be the reason why
the dialer map statement doesn't work on the dialer interface b/c the dialer
interface is in a dialer pool. Try setting the BRI in a rotary group. That
way, you will be able to configure dialer map statements on the dialer
interface.
That's how I setup DBU for remote clients to dial back into our network.
perkinsr@WellsFargo.COM wrote:
> You are missing the "dialer map snapshot" command that tells snapshot
> routing who to call for updates. I know you can't use dialer map with
> dialer interface, but maybe after you issue the snapshot command you can
> issue a dialer map snapshot command.
>
> Ray
>
> -----Original Message-----
> From: Chuck Sakir Balikcioglu [mailto:sbalikcioglu@lucent.com]
> Sent: Tuesday, August 21, 2001 10:41 AM
> To: SALMON, MARK (SBMS); 'ccielab@groupstudy.com'
> Subject: Re: Snapshot routing on Dialer Interfaces
>
>
> Second scan, I thought snapshot is good for distance vector routing. I
> never tried with OSPF, if you like to try with ospf how are you going to
> suppress hellos. You may try ip ospf demand circuit but as I said before
> this might not work at all with snapshot routing.
> Another 2 cents.
>
> Chuck.
>
> At 12:36 PM 8/21/01 -0400, Chuck Sakir Balikcioglu wrote:
> >At the first scan I can see that the client configured as ppp callback
> >accept (server should have this). The client should be the requester. Also
> >the load-threshold, I did not get the point of this, I think there are
> >some loose ends to combine this command to. If the condition matches what
> >would you like the action to be? May be missing multilink command? What is
> >the access list 199? Where is the dial1 map-class?
> >Just my 2 cents.
> >
> >Chuck.
> >
> >At 11:12 AM 8/21/01 -0500, SALMON, MARK (SBMS) wrote:
> >>Has anyone ever configured and successfully tested snapshot routing on
> >>dialer interfaces? Here is my config. Mine will not initiate the call at
> >>all.
> >>
> >>
> >>interface Dialer1
> >> ip address 172.30.232.3 255.255.255.0
> >> no ip directed-broadcast
> >> encapsulation ppp
> >> ip ospf network point-to-point
> >> dialer remote-name r5
> >> dialer pool 1
> >> dialer idle-timeout 180
> >> dialer string 8358662 class dial1
> >> dialer load-threshold 64 outbound
> >> dialer-group 1
> >> ipx network 33335555
> >> snapshot client 5 8 dialer
> >> ppp callback accept
> >> ppp authentication chap
> >>end
> >>
> >>dialer-list 1 protocol ip list 199
> >>dialer-list 1 protocol ipx permit
> >>
> >>Mark Salmon
> >>Sr. WAN Engineer Great Lakes Region
> >>Cingular Wireless
> >>2000 Ameritech Center Drive 3F07B
> >>Hoffman Estates IL 60195
> >>Voice: (847)765-3999
> >>Pager: (847)992-0458
> >>Email: mark.salmon@cingular.com
> >>**Please read:http://www.groupstudy.com/list/posting.html
> >Regards,
> >
> >(Chuck) Balikcioglu, Sakir
> >Network Systems Consultant
> >CCNP+ATM, MCSE
> >Lucent Networkcare, Falls Church Office
> >Phone: 703 226 4606
> >Pager:1800 884 9954
> >Email: sbalikcioglu@lucent.com
> >Epage: page_chuck_balik@ins.com
> >**Please read:http://www.groupstudy.com/list/posting.html
> Regards,
>
> (Chuck) Balikcioglu, Sakir
> Network Systems Consultant
> CCNP+ATM, MCSE
> Lucent Networkcare, Falls Church Office
> Phone: 703 226 4606
> Pager:1800 884 9954
> Email: sbalikcioglu@lucent.com
> Epage: page_chuck_balik@ins.com
> **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
Tony Ng, MCSE+I, CCNP
Senior Network Analyst
Goldman Sachs
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:55 GMT-3