From: tom cheung (tkc9789@xxxxxxxxxxx)
Date: Tue Aug 21 2001 - 08:41:03 GMT-3
There had been lengthy discussions on this topic not too long ago. I'm sure
you can find what you're looking for from the archives. If I remember
correctly, Brian Dennis posted a good list of what works and what not.
>From: Jason Sinclair <sinclairj@powertel.com.au>
>Reply-To: Jason Sinclair <sinclairj@powertel.com.au>
>To: "'ELAW@dr.dk'" <ELAW@dr.dk>, yyao@sympatico.ca
>CC: ccielab@groupstudy.com
>Subject: RE: isis over frame relay
>Date: Tue, 21 Aug 2001 17:01:58 +1000
>
>Erik,
>
>I disagree with this - if you run ISIS over ATM (which is NBMA on the major
>interface), then it works OK. I am sure that you need to have a layer 2
>mapping to CLNS for this to work.
>
>Cheers,
>
>Jason Sinclair
>Team Leader - NSG
>POWERTEL Limited
>Level 11, 55 Clarence Street, SYDNEY
>Phone: 61-2-8264-3820
>Mobile: 0416 105 858
>jasons@powertel.net.au
>
>
>
> -----Original Message-----
> From: ELAW@dr.dk [mailto:ELAW@dr.dk]
> Sent: Tuesday, 21 August 2001 17:36
> To: yyao@sympatico.ca
> Cc: ccielab@groupstudy.com
> Subject: RE: isis over frame relay
>
> > Does anyone know how to configure ISIS over frame relay?
> >
> > R2/s0----------s0/R1/s0------------s0.1/R3
> >
> > R1 is the hub, it use int s0 (2 DLCI) to connect with R2
>and R3.
> >
> > I have router isis and net xxxxxx configured on all three
>routers.
> > I also have all the interfaces configured with ip router
>isis.
> >
> > When I do show clns is-neighbors, I can not find neighbors
>at all.
>
> IS-IS doesn't work over NBMA.
> You need p2p subinterfaces or a full mesh over Frame Relay.
> Same goes for NLSP.
>
> --Erik
> **Please read:http://www.groupstudy.com/list/posting.html
>**********************************************************************
>This email (including all attachments) is intended solely for the named
>addressee. It is confidential and may contain commercially sensitive
>information. If you receive it in error, please let us know by reply email,
>delete it from your system and destroy any copies.
>
>This email is also subject to copyright. No part of it should be
>reproduced,
>adapted or transmitted without the prior written consent of the copyright
>owner.
>
>Emails may be interfered with, may contain computer viruses or other
>defects
>and may not be successfully replicated on other systems. We give no
>warranties in relation to these matters. If you have any doubts about
>the authenticity of an email purportedly sent by us, please contact us
>immediately.
>
>**********************************************************************
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:55 GMT-3