From: Daniel C. Young (danyoung99@xxxxxxxxxxxx)
Date: Sun Aug 19 2001 - 00:28:17 GMT-3
Hmm... think about what causes encap failures in frame-relay. Hint: CLNS is
directly mapped to layer 2. IP is fine, but does ISIS use IP?
Daniel
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of tom
cheung
Sent: Sunday, 5 August 2001 2:47 PM
To: DDavis@foxgal.com; ccielab@groupstudy.com
Subject: Re: ISIS Encap Failed?
I had similar problem with one of my labs. You may want to make sure that
the frame relay interface types match on both ends of the circuit. As this
will cause ISIS hello mis-match.
Tom
>From: "Davis, David" <DDavis@foxgal.com>
>Reply-To: "Davis, David" <DDavis@foxgal.com>
>To: <ccielab@groupstudy.com>
>Subject: ISIS Encap Failed?
>Date: Sun, 5 Aug 2001 16:29:34 -0500
>
>Does anyone have any suggestions on the probably cause for an ISIS
>"encap failed" error during "debug isis adjecency" ?
>
>The ISIS connection is trying to send IIH packets over a frame relay
>network. There is IP connectivity over the frame network as I can ping
>the other side.
>
>Any help would be appreciated!
>
>Thanks,
>David
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:53 GMT-3