From: Jerry Toomey (jetoomey@xxxxxxxxx)
Date: Fri Aug 17 2001 - 12:54:35 GMT-3
I know "telnet IP" means Interrupt Process or Interrupt Processor.
I'm not sure about the others. I looked them up and they didn't seem to
apply to anything I would ever want to do.
Jerry
--- jonatale@earthlink.net wrote:
> cool!
>
> ...but what do:
> EC, AYT, etc mean (in the telnet rfc?)
>
> also
> what is telnet IP
>
> i had discovered that you can send a break out the rev telnet session w/
> cntrl-shft-6,b so i guess i'd need to leave out the "^^" on the others
> too,
> right?
>
>
>
> Jerry Toomey wrote:
>
> > On the Ctrl-Shift-6 command: if you type Ctrl-Shift-6, then "?", it
> will
> > give you the help screen:
> >
> > ADSL-Router#
> > [Special telnet escape help]
> > ^^B sends telnet BREAK
> > ^^C sends telnet IP
> > ^^H sends telnet EC
> > ^^O sends telnet AO
> > ^^T sends telnet AYT
> > ^^U sends telnet EL
> > ADSL-Router#
> >
> > I've always used Ctrl-Shift-6, then "c".
> >
> > Jerry
> >
> > --- Denise Donohue <fradendon@home.com> wrote:
> > > The command to stop the trace is just ctrl-shift-6. Adding the x
> tells
> > > the
> > > router to suspend (not close) the telnet session and returns you to
> the
> > > originating router/switch.
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf
> Of
> > > Jason Sinclair
> > > Sent: Wednesday, August 15, 2001 11:20 PM
> > > To: 'Annu'; ccielab@groupstudy.com
> > > Subject: RE: Traceroute & Termserver
> > >
> > >
> > > Annu,
> > >
> > > In the term config set thet term emulation to vt-220.
> > >
> > > Regards,
> > >
> > > Jason Sinclair
> > > Team Leader - NSG
> > > POWERTEL Limited
> > > Level 11, 55 Clarence Street, SYDNEY
> > > Phone: 61-2-8264-3820
> > > Mobile: 0416 105 858
> > > jasons@powertel.net.au
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: Annu [mailto:annu_roopa@yahoo.com]
> > > Sent: Thursday, 16 August 2001 12:45
> > > To: ccielab@groupstudy.com
> > > Subject: Traceroute & Termserver
> > >
> > > Group,
> > >
> > > May be this has been discussed,but could not find it
> > > in archives.
> > >
> > > Q1. I have got a Termserver to router connection and
> > > when trying to terminate a traceroute in router( with
> > > Ctrl+shift 6 x) it comes back to TS rather than break
> > > the traceroute.What is the solution ? as the
> > > traceroute continues....
> > >
> > > Example:
> > > r9#traceroute 10.1.1.1
> > > Type escape sequence to abort.
> > > Tracing the route to 10.1.1.1
> > >
> > > 1 * * *
> > > 2 * * *
> > > 3 * * *
> > > 4 * * *
> > > 5 * * *
> > > 6 * * *
> > > 7
> > > termsrver#
> > > [Resuming connection 3 to r9 ... ]
> > > *
> > >
> > > Q2. I am using hyperterm with win2K and somehow my
> > > arrow keys dont work to repeat or execute previous
> > > cmds.Do i have to upgrade it or what am i missing.i
> > > had done this before but seem to forget ?
> >
> > =====
> > Jerry Toomey of http://www.wansend.com can be reached at 949-439-4685
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:52 GMT-3