From: CCIE yong (ccie_yong@xxxxxxxxxxx)
Date: Fri Aug 17 2001 - 10:48:12 GMT-3
Hi,
I tried to seach the archive but still couldn't clear my doubt.
When a frame relay network is configured in full mesh but the practice lab
question asked you to use only certain DLCI number, what will be the
solution ?
What I'll do is: (from one of the router, assuming there are 3 routers
connected thru frame cloud)
interface Serial0
ip address 10.16.1.2 255.255.0.0
encapsulation frame-relay
frame-relay map ip 10.16.1.1 201 broadcast
frame-relay map ip 10.16.1.3 201 broadcast
no frame-relay inverse-arp
!
IS the above config enough ?
what are we really looking for when said that only used certain DLCI number
?
"show frame pvc" only show the DLCI that you used ??
OR "show frame pvc" show you all the DLCI configured on the frame switch but
status for the "unused" DLCI will be "ACTIVE, UNUSED", and the rest of the
used DLCI will be "ACTIVE, LOCAL" ??
confused....
Appreciate your input, thanks in advance.
Yonger
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:52 GMT-3