From: Jason Gardiner (gardiner@xxxxxxxxxx)
Date: Thu Aug 16 2001 - 22:59:00 GMT-3
You may want to try a straight through cable instead of a rollover. I had
the same problem.
Thanks,
Jason Gardiner
Supervisor, Engineering Services
Sprint E|Solutions
"You can swim all day in the Sea of Knowledge and
still come out completely dry. Most people do."
- Norton Juster
On Thu, 16 Aug 2001, Kenneth Leon wrote:
> Hello,
>
> I have a Catalyst 1924C switch. Maybe someone can give me some information
> on how to get access to it.
>
> I know that my modular DB-9 plusg are working. Tested with cisco routers
> whle they were attached to my PC DB-9 serial comm port 2. The rollover
> cable is also good per same test.
>
> The only dispplay I get when connecting to the DB-9 console port of this
> switch using Hyperterminalis :
>
> ATQ0Z0#ATQ0Z
> ATQ0Z0
>
> Settings 8,N,1 and none for flowcontrol (no flowcontrol) which is the same
> as a 2500 series router. These settings are right off the cisco web page
> instructions for this device.
>
> Anyone familiar with this condition or message?
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:52 GMT-3