From: Andrew Lennon (alennon_uk@xxxxxxxxx)
Date: Wed Aug 15 2001 - 19:29:48 GMT-3
Nicholas,
I am guessing here, but are you looking at DLSW?
Common SAPs for DLSW are 04 08 and 0C and their responses are all +1
Standard acl rules apply, so a 1 bit means don't care.
http://www.cisco.com/warp/customer/697/dlswfilter.shtml
HTH
Andy
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Nicholas Jaksec
Sent: 15 August 2001 15:30
To: CCIE
Subject: Access-list 200-299 filtering
Does anyone know where I can found documentation on what the different
SAP
values are to be used and the wildcard mask in an Access-list 200-299.
Example: How to block SAPS, Explorer packets, etc...
Thanks !!
********************************************
Nicholas R. Jaksec, CCNP, CCDP, MCSE+I, CNA
Network Systems Engineer
Lucent Worldwide Services
One North Shore Center
12 Federal St. Suite 420
Pittsburgh, Pa 15212
Office: 412-330-6336 Fax: 412-323-7665
Pager: 1-800-467-1467
Email: jaksec@lucent.com
********************************************
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:51 GMT-3