From: Diehm, Brian (Brian.Diehm@xxxxxxxxxx)
Date: Wed Aug 15 2001 - 17:49:44 GMT-3
Lets say in the lab they decided to pick a random number to set the speed
to. Would there be any way to figure it out other than guess?
Thanks,
Brian
-----Original Message-----
From: Jason Sinclair [mailto:sinclairj@powertel.com.au]
Sent: Tuesday, August 14, 2001 11:52 PM
To: 'hans'; ccielab@groupstudy.com
Subject: RE: console baud rate
Hans,
Please note under the 2500's I own I can set the speed to 115200. The config
is as follows:
Conf t
Line 0
Speed 115200
end
Note that this is running 12.0.9 IOS IP only.
You can also break into ROM mode at boot and change the console speed
setting there.
Regards,
Jason Sinclair
Team Leader - NSG
POWERTEL Limited
Level 11, 55 Clarence Street, SYDNEY
Phone: 61-2-8264-3820
Mobile: 0416 105 858
jasons@powertel.net.au
-----Original Message-----
From: hans [mailto:yyao@sympatico.ca]
Sent: Wednesday, 15 August 2001 14:41
To: ccielab@groupstudy.com
Subject: console baud rate
Hi all,
Does anyone know how to change the baud rate of the console
of 2500 router
into a higher speed than 9600, say 28800.
I have checked the config-register, it seems to allow only
1200, 2400 and
9600. However, under the line console 0, I can find option
for speed.
Hans
**Please read:http://www.groupstudy.com/list/posting.html
**********************************************************************
This email (including all attachments) is intended solely for the named
addressee. It is confidential and may contain commercially sensitive
information. If you receive it in error, please let us know by reply email,
delete it from your system and destroy any copies.
This email is also subject to copyright. No part of it should be reproduced,
adapted or transmitted without the prior written consent of the copyright
owner.
Emails may be interfered with, may contain computer viruses or other defects
and may not be successfully replicated on other systems. We give no
warranties in relation to these matters. If you have any doubts about
the authenticity of an email purportedly sent by us, please contact us
immediately.
**********************************************************************
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:51 GMT-3