From: Piperw222@xxxxxxx
Date: Mon Aug 13 2001 - 17:57:13 GMT-3
The following is my scenario.
r1 - vlan 10 r2 vlan 20. I have put a workstation on vlan 10, this
workstation is part of the home network located on vlan 20 which is r2. On
router r1 I have put the redistribute mobile and mobile arp commands ( I am
redistributing into OPSF). The only way that I can get the "M" route in the
routing table is if I keep r2 in vlan 10. I Don't think that r2 should be
part of vlan 10, Because then the mobile node (workstation) would be on the
same vlan as the home network. However, when I keep r2 on vlan 20, I do not
get the "M route" in the routing table and I cannot ping the workstation from
vlan 20 and vice versa. Can someone Please help me with this, I am trying to
put together a simple scenario with mobile ip. I would appreciate any help
that you can offer. If anyone has a simlpe working scenario of mobile IP I
would appreciate if he can post it to the group.
Thanks,
Lou
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:50 GMT-3